Cricut® Project Center



Trick or Treat


profile
Design by: bucharoo (1 Project)
Project skill level: easy
Project time: 30 minutes to 1 hour
Project tags: Halloween Holiday Layouts Scrapbook Layouts

A scrapbook page using the Create a Critter 2 sneak preview. can't wait to see the whole cartridge! The sneak peek is adorable. It was hard narrowing down which one to use. I settled on the cute pumpkin bag and the ghost. I thought I would use it to hold a special Halloween picture.

CRICUT ®: WHAT WAS USED

OTHER MATERIALS NEEDED

  • white orange and black card stock
  • candy corn background paper from my stas
  • adhesive gems from Studio112
  • black ribbon from Robert Stanley Coll
  • adTech gluerunner
  • fun foam
  • Xyron 2 in. sticker maker

STEP-BY-STEP How-TO INSTRUCTIONS

I cut the jack-o-lantern sack from orange card stock at 9.50 inches and backed it with a scrap of black card stock. I then cut some 1/2 inch strips of fun foam and ran a strip from the glue runner down the length of each strip on both sides of the fun foam and put it around the sides and bottom of the sack so it would be raised enough for the ghost to slide in and out easily.
Next, I cut out the pirate ghost at 9.18 using white card stock for the body and black card stock for his hat. I cut off the patch because my picture covered most of it up. I stapled a ribbon onto the top of his hat so that you could use it to pull the ghost out of the bag. I used an adhesive black pearl to cover the staple.
For the title, Trick or Treat I used the trick or treat template in Pumpkin Carving Seasonal cartridge and used the letters instead of the template. (I saved it for another project) I ran the letters through my Xyron for a quick application and put them on a scrap of black card stock so the letters wouldn't get lost in the background.

Step 1

I cut the jack-o-lantern sack from orange card stock at 9.50 inches and backed it with a scrap of black card stock. I then cut some 1/2 inch strips of fun foam and ran a strip from the glue runner down the length of each strip on both sides of the fun foam and put it around the sides and bottom of the sack so it would be raised enough for the ghost to slide in and out easily.

Step 2

Next, I cut out the pirate ghost at 9.18 using white card stock for the body and black card stock for his hat. I cut off the patch because my picture covered most of it up. I stapled a ribbon onto the top of his hat so that you could use it to pull the ghost out of the bag. I used an adhesive black pearl to cover the staple.

Step 3

For the title, Trick or Treat I used the trick or treat template in Pumpkin Carving Seasonal cartridge and used the letters instead of the template. (I saved it for another project) I ran the letters through my Xyron for a quick application and put them on a scrap of black card stock so the letters wouldn't get lost in the background.

Related Projects

COMMENTS

Add your comments