Cricut® Project Center



Create A Critter 2 Contest Project - 1 Card


profile
Design by: Jooniper (7 Projects)
Project skill level: moderate
Project time: 30 minutes to 1 hour
Project tags: Halloween Holiday Cards Seasonal Cards Cards Playful Clean & Simple

Card is 5" X 5" square die-cut. The card features layers separated by acetate. It was created using Cricut CraftRoom. Complete CCR file available for download. Every cut and cut size are provided in the cut file. Only thing you have to do is cut and glue the pieces. I used the haunted house and tree from Create a Critter 2. I also used George and Basic Shapes for the frames. The bats are from Holiday Cakes. And the fence is from Mini Monsters.

CRICUT ®: WHAT WAS USED

Project Cut Files

STEP-BY-STEP How-TO INSTRUCTIONS

After downloading the cut file and opening it in Cricut Craft Room. Find the moon piece that is only part of the moon. Then add glitter to the moon and glue it to the moon/house cut out piece.
Then cut your actetate sheet in a 4 3/4 inch by 4 3/4 inch square.

Then get the square house/moon cut out piece and apply Terrifically Tacky Tape on all 4 sides on the piece while it is facing up. Then remove the red peel from the tape and line up and apply the acetate sheet you cut. Now on the same cut out piece apply another layer of tape on top of the acetate on all 4 sides.
Now take the card base and score the card in half.

Once done scoring, find your patterned paper and cut it at 4 3/4 inch by 4 3/4 inch square for the inside of the card. Ink your edges if you want.

Then glue your tree and bats to the card base paper. The tombstone is the piece from the house. It is the door. Use a foam dot on the tombstone.
Now get the long card base cut out piece that has the fence. Now get the moon/house acetate piece and remove the red peel from the tape.

Now line up the moon/house/acetate piece on the back side of the card base piece, behind the fence. Make sure to line it up well.

Step 1

After downloading the cut file and opening it in Cricut Craft Room. Find the moon piece that is only part of the moon. Then add glitter to the moon and glue it to the moon/house cut out piece.

Step 2

Then cut your actetate sheet in a 4 3/4 inch by 4 3/4 inch square.

Then get the square house/moon cut out piece and apply Terrifically Tacky Tape on all 4 sides on the piece while it is facing up. Then remove the red peel from the tape and line up and apply the acetate sheet you cut. Now on the same cut out piece apply another layer of tape on top of the acetate on all 4 sides.

Step 3

Now take the card base and score the card in half.

Step 4

Once done scoring, find your patterned paper and cut it at 4 3/4 inch by 4 3/4 inch square for the inside of the card. Ink your edges if you want.

Then glue your tree and bats to the card base paper. The tombstone is the piece from the house. It is the door. Use a foam dot on the tombstone.

Step 5

Now get the long card base cut out piece that has the fence. Now get the moon/house acetate piece and remove the red peel from the tape.

Now line up the moon/house/acetate piece on the back side of the card base piece, behind the fence. Make sure to line it up well.

Awards
See available awards

SHOWCASED - A FEATURED PROJECT
SHOWCASED - A FEATURED PROJECT
PRIZED - PROJECT FAVED 25+ TIMES
PRIZED - PROJECT FAVED 25+ TIMES
CELEBRATED - PROJECT FAVED 50+ TIMES
CELEBRATED - PROJECT FAVED 50+ TIMES
  • PRIZED - PROJECT FAVED 25+ TIMES

Related Projects

COMMENTS

Add your comments

I used Holiday Cakes. They are a layer for the Halloween border.

Published on September 19, 2012 by Jooniper Flag Comment As Inappropriate
This card is just adorable. Which cartridge did you use for the bats?

Published on September 18, 2012 by RacerLuvr Flag Comment As Inappropriate