Flag
  • Sign In
  • 0 items
  • Search
Welcome Guest! Please login to enable all features.

Notification

Icon
Error

MeredithMendoza Offline
#1 Posted : Saturday, May 07, 2011 6:37:44 AM(UTC)
MeredithMendoza

Rank: Newbie

Groups: Registered
Joined: 11/29/2010(UTC)
Posts: 7
Location: Ohio

Thanks: 5 times
I got my Cricut for Christmas and I just started using it this week. I tried several times to make a few cuts on regular cardstock and the paper is not cut all the way through and when I try to remove it, the paper rips. I adjusted the blade everywhere from 1 - 6. What other adjustments do I have to make?
Mommer Offline
#2 Posted : Saturday, May 07, 2011 7:12:52 AM(UTC)
Mommer

Rank: Advanced Member

Groups: Registered
Joined: 11/6/2009(UTC)
Posts: 79
Location: Minnesota

Thanks: 9 times
Was thanked: 31 time(s) in 19 post(s)
pressure wheel and speed. They are the wheels on left. Increase or decrease. I usually have mine on 4(can't remember the name used min-max. I think med high ??? ) see if that works more the pressure than speed.
Penguin Collector Offline
#3 Posted : Saturday, May 07, 2011 7:14:02 AM(UTC)
Penguin Collector

Rank: Advanced Member

Groups: Registered
Joined: 5/27/2010(UTC)
Posts: 756
United States
Location: San Antonio, TX

Thanks: 145 times
Was thanked: 164 time(s) in 147 post(s)
I pm'd you some info. I hope it helps!
Lynn1 Offline
#4 Posted : Tuesday, May 10, 2011 7:10:00 AM(UTC)
Lynn1

Rank: Newbie

Groups: Registered
Joined: 12/31/2010(UTC)
Posts: 4

I do the same thing, slow down your speed and lighten up your pressure-I use a 2 for velumn, a 4 or 5 for regular cardstock a 6 for heavy-this is for the blade-What I first did is take a basic shape and cut it out using different speed and pressure and blade depth in the beginning this will help. It is trial and error unfortunately. Now only if they could make a cricut that could scan your paper and adjust accordingly-but I am sure they will have that when our kids are out age! Hope this helps and good luck!
scrapnfan Offline
#5 Posted : Wednesday, May 11, 2011 7:44:35 AM(UTC)
scrapnfan

Rank: Advanced Member

Groups: Registered
Joined: 11/19/2008(UTC)
Posts: 1,102

Thanks: 690 times
Was thanked: 251 time(s) in 215 post(s)
Make sure you have a spatula to remove items from your mat and that will help them not tear from that point.
Pixichick Offline
#6 Posted : Friday, May 27, 2011 11:22:18 PM(UTC)
Pixichick

Rank: Advanced Member

Groups: Registered
Joined: 4/26/2010(UTC)
Posts: 56
Location: Los Angeles, Ca

Thanks: 30 times
Was thanked: 60 time(s) in 28 post(s)
You may need to "season" your mat. I found this link really helpful:

Cricut Dan
NotGoingGreyGracefully Offline
#7 Posted : Sunday, May 29, 2011 3:56:42 PM(UTC)
NotGoingGreyGracefully

Rank: Advanced Member

Medals: Cricut Circle Member: Member of the Cricut Circle

Groups: Registered, Circle Member
Joined: 6/5/2010(UTC)
Posts: 1,745
Location: South Texas Coast, MQ #349

Thanks: 946 times
Was thanked: 799 time(s) in 449 post(s)
aboverubiesstudio has a paper setting guide that you can download for free. It even lists cardstock and paper by brand name, and gives the pressure, speed and blade depth to use. (If your blade depth is too high, you'll cut the mat.)

Also - check that you have the blade housing loaded correctly - it goes in way lower than you'd think. I had to put my blade housing in three times when my C was new before I had the clamp around the right part of the housing. Check on YouTube to see if there are any videos that help - somebody has to have a close-up of the housing in the wrong place and the right place.

BTW, they haven't come up with a product that will self-adjust to the type of paper on our mat, but the new E2, you can enter light , medium, or heavy paper, light or heavy cardstock (I think) and it will self-adjust to whatever you've told it you are cutting. Yet another reason to save up for an E!!

HTH!BigGrin
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2014, Yet Another Forum.NET
This page was generated in 0.548 seconds.
nebo-cricut-02