Flag
  • Sign In
  • 0 items
  • Search
Welcome Guest! Please login to enable all features.

Notification

Icon
Error

SueHenthorn Offline
#1 Posted : Monday, September 27, 2010 6:16:56 PM(UTC)
SueHenthorn

Rank: Newbie

Groups: Registered
Joined: 12/30/2007(UTC)
Posts: 1

Hi there, my first time here, just wondering if any one out there has cut like 1/2 inch letters with the expression, mine are tearing, seems when i cut larger letters it works fine, smaller ones do not..Any ideas for me to try? thanks all..Confused I am cutting on vinyl..
CarrieS Offline
#2 Posted : Monday, September 27, 2010 6:36:29 PM(UTC)
CarrieS

Rank: Advanced Member

Groups: Registered
Joined: 1/11/2007(UTC)
Posts: 95
Location: St. Louis Missouri

Thanks: 8 times
Was thanked: 27 time(s) in 22 post(s)
The best setting for vinyl is
Blade Depth 6
Speed 3
Pressure3

If you are doing that correctly then maybe you need a new blade. When anything starts tearing then I always need to change the blade.

not to ask a stupid question you are leaving the backing on when you cut it right?
ScrappyKristin Offline
#3 Posted : Tuesday, September 28, 2010 6:44:24 AM(UTC)
ScrappyKristin

Rank: Advanced Member

Groups: Registered
Joined: 2/14/2009(UTC)
Posts: 47
Location: Ohio

Thanks: 5 times
Was thanked: 14 time(s) in 6 post(s)
Try a new blade, for sure. It does happen more frequently with the smaller letters, you often don't get as clean a cut. You could also try the deep cut blade, just because you'll have more clearance and possibly the cutting implement won't drag on the vinyl.

You can flip the vinyl over and cut backwards through the backing to the vinyl. It makes it tricker to get off, but helps with the drag, since the backing is so slippery.
GStevens Offline
#4 Posted : Wednesday, September 29, 2010 3:08:38 AM(UTC)
GStevens

Rank: Member

Groups: Registered
Joined: 10/3/2009(UTC)
Posts: 19
Location: Conyers, GA

Thanks: 2 times
Was thanked: 18 time(s) in 6 post(s)
One idea for sure is to make the speed slow for sure, this goes for intricate cuts too of any size.
SheriA Offline
#5 Posted : Sunday, October 24, 2010 7:33:17 PM(UTC)
SheriA

Rank: Member

Groups: Registered
Joined: 2/9/2009(UTC)
Posts: 18
Location: Minnesota

Was thanked: 3 time(s) in 3 post(s)
I normally cut my vinyl with everything set at 3. I always have and it worked perfectly. Well yesterday I put in a new blade and when I usedthose setting the blade went all the way thru the backing so I had to change the blade to 2 and it still went thru a little. I thought that was kinda strange to have to change my settings as the blade was new at one time when I did use the 3-3-3 settings. This is with the expression.

Sheri
DogMom Offline
#6 Posted : Wednesday, October 27, 2010 1:24:09 PM(UTC)
DogMom

Rank: Advanced Member

Medals: Cricut Circle Member: Member of the Cricut Circle

Groups: Circle Member, Registered
Joined: 2/7/2010(UTC)
Posts: 158
Location: northwood, OH

Thanks: 23 times
Was thanked: 85 time(s) in 39 post(s)
I cut on 3, 3, 3. Try adjusting your speed lower. or check your blade. Sometimes there may be just a bit of something on it. Good Luck
Claire'sCreative Offline
#7 Posted : Wednesday, October 27, 2010 5:01:44 PM(UTC)
Claire'sCreative

Rank: Member

Groups: Registered
Joined: 3/23/2010(UTC)
Posts: 12
Location: Florida

Thanks: 7 times
Was thanked: 2 time(s) in 2 post(s)
When cutting vinyl, I change to the deep cut blade housing, set the pressure on 4 and the speed on the 3rd bar. It does a "kiss" cut not all the way through and is easy to remove (saw it done on You tube that way when Cricut was doing a demo at the show. I use blue painters tape to transfer. Works great!
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2014, Yet Another Forum.NET
This page was generated in 0.696 seconds.
nebo-cricut-01