Flag
  • Sign In
  • 0 items
  • Search
Welcome Guest! Please login to enable all features.

Notification

Icon
Error

eabrooksief1b38660 Offline
#1 Posted : Wednesday, July 04, 2012 10:26:15 AM(UTC)
eabrooksief1b38660

Rank: Newbie

Groups: Registered
Joined: 6/20/2012(UTC)
Posts: 1

I recently purchased a Cricut Imagine last weekend from Hobby Lobby and have yet to use it. I have disabled my firewall so I can do a system update but it never updated after 4 hours. I called customer care and they suggested to do a system restore but it is stuck and currently says installing firmware: bad image. It's been at the same screen today for the past 2 hours and I don't know what to do. I followed the instructions posted by Cricut for a system restore but it has stalled. My local Hobby Lobby no longer carry Cricut Imagine in stock as well as the other craft stores. I'm at the point feeling like I wasted $300.00 for nothing. Any assistance would be greatly appreciated.

Thank You,
Elizabeth
Crying Mad
eabrooksief1b38660 attached the following image(s):
cricut.png
Khrista Offline
#2 Posted : Thursday, July 05, 2012 2:55:40 PM(UTC)
Khrista

Rank: Advanced Member

Medals: Cricut Circle Member: Member of the Cricut Circle

Groups: Circle Member, Registered
Joined: 5/12/2010(UTC)
Posts: 5,343
United States
Location: Southwest Washington State

Thanks: 1437 times
Was thanked: 2490 time(s) in 1389 post(s)
Originally Posted by: eabrooksief1b38660 Go to Quoted Post
I recently purchased a Cricut Imagine last weekend from Hobby Lobby and have yet to use it. I have disabled my firewall so I can do a system update but it never updated after 4 hours. I called customer care and they suggested to do a system restore but it is stuck and currently says installing firmware: bad image. It's been at the same screen today for the past 2 hours and I don't know what to do. I followed the instructions posted by Cricut for a system restore but it has stalled. My local Hobby Lobby no longer carry Cricut Imagine in stock as well as the other craft stores. I'm at the point feeling like I wasted $300.00 for nothing. Any assistance would be greatly appreciated.

Thank You,
Elizabeth
Crying Mad



Ikes $300? I thought HL had them down to $180 or something like that. What kind of internet are you using? I would close out cricutsync and start it over. If it stalls out, unplug the USB and plug it back into the same port. If it still is stalled after 5 minutes, then unplug the USB cord again and plug it into a different port.

It's not just your firewall, also need to make sure your antivirus software doesn't interfere or recognizes cricutsync and adobeair as safe.

I have system restore on high speed internet can take an hour - hour and a half if it's not problematic. If it gets stuck at the 'content' even after the above, call PC.

HTH
:)Khrista
mariellesuarezd05f3c5b Offline
#3 Posted : Tuesday, December 11, 2012 5:41:53 AM(UTC)
mariellesuarezd05f3c5b

Rank: Newbie

Groups: Registered
Joined: 12/10/2012(UTC)
Posts: 2

Hi!!

Did you resolved this issue? I'm getting the same error! I need help!

I only have 2 months with it, and I don't use it often. The machine was cutting and all of the sudden froze. I unplugged it and puggled it again and never worked again,just keeps restarting,presenting de cricut logo over and over again, in order to connect the computer I had to put it in "safe mode" (Blue screen) and then run cricut sync....After uploading content I get the same error: BAD IMAGE.

What else can I do?!?!?!?!Crying Crying Crying Crying Crying
mariellesuarezd05f3c5b Offline
#4 Posted : Tuesday, December 11, 2012 5:47:27 AM(UTC)
mariellesuarezd05f3c5b

Rank: Newbie

Groups: Registered
Joined: 12/10/2012(UTC)
Posts: 2

I have the cricut expression 2
Khrista Offline
#5 Posted : Tuesday, December 11, 2012 10:39:00 PM(UTC)
Khrista

Rank: Advanced Member

Medals: Cricut Circle Member: Member of the Cricut Circle

Groups: Circle Member, Registered
Joined: 5/12/2010(UTC)
Posts: 5,343
United States
Location: Southwest Washington State

Thanks: 1437 times
Was thanked: 2490 time(s) in 1389 post(s)
The machine freezing can be various things:

1. Are you using Cricut Craft Room? It doesn't work for all people and according to PC the Imagine is only going to be support as a stand alone machine (which means no CCR so if it works, great.. if not.. sorry)
2. What cartridge/ cartridges were you using with it?
3. What are all of the numbers in the ( ) on the about screen?


Sometimes it'll randomly reboot. If it's not doing that all the time, odds are it was the cartridge or a specific image on the cartridge that they didn't catch. There's a few known ones that cause issues. (like Belle's lips on one of the disney ones).

I would try to run cricut sync at least two more times. Make sure that you don't have a firewall and antivirus software interferring. They need to recognize Adobe Air and CricutSync as safe. You also need to make sure your computer doesn't go to sleep/night/screensaver mode while it's updating. If after two more times it doesn't go through, then call PC. Particularly if it is still under warranty.

:)Khrista
paco877bf1c3156 Offline
#6 Posted : Thursday, April 04, 2013 9:37:14 PM(UTC)
paco877bf1c3156

Rank: Newbie

Groups: Registered
Joined: 4/4/2013(UTC)
Posts: 1

Please I need help!,

my cricut imagine model crim0001

I'm getting the same error! I need help!Huh

only de logo
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2014, Yet Another Forum.NET
This page was generated in 0.363 seconds.
nebo-cricut-02